Full Ceramic

Full Ceramic

The aesthetic demands of the American consumer have been increasing through the years. The NDX Full Ceramic family of crowns can meet this demand. These restorations offer high translucency, natural vitality and excellent marginal integrity.

Enext™

Enext is a second-generation lithium disilicate crown. Enext is made from a lithium disilicate structure that is denser than other similar materials; making it just as versatile in the mouth, but with improved aesthetics and strength. The improved crystalline density also assists with stability allowing NDX Keller to match value much easier.

Indications

  • Anterior and posterior restorations
  • Up to 3-unit bridges in the anterior or premolar region
  • Veneers
  • Minimally invasive inlays, onlays, and partial crowns
  • Implant restorations

Contraindications

  • Severe bruxism and/or clenching
  • Limited occlusal clearance

Advantages / Benefits

  • Improved flexural strength – 470+MPa
  • Unparalleled aesthetics for a pressed ceramic
  • Improved color stability – no graying and better shade matching
  • Dense material reduces abrasion, which leads to a longer lifespan

Prep Requirements

  • 1.5mm occlusal and axial wall reduction
  • 1mm chamfer margin required

Seating Recommendations

  • Bonding: Use self-cure or dual cure adhesive cement for most restorations. For cosmetic veneers, use light cure or dual cure cement with shading options.
  • Cementation: Indicated for full coverage crowns only. Use self-adhesive resin cement or resin modified glass ionomer (expansion less than .5%) in situations where a conventional cement would normally have been used.

Adjusting & Polishing Recommendations

  • Use a fine grit diamond bur at a slow speed with copious amounts of water to avoid over-heating the glass-ceramic.
  • Polish with a porcelain polishing wheel and diamond polishing paste.

What to Send

  • Upper and lower impressions or digital scans
  • Bite registration or IOS bite relationship scan
  • Shade

Dental Insurance codes

  • D6519 Inlay/Onlay - Porcelain Ceramic
  • D2740 Crown - Porcelain/Ceramic Substrate
  • D2783 Crown 3/4 Porcelain Ceramic (Does not include veneers)
  • D2962 Labial Veneer (Porcelain Laminate)
  • D6245 Pontic Porcelain/Ceramic
  • D6740 Abutment Crown Porcelain/Ceramic

Guarantee

  • 8-year warranty for break and fracture during normal use.

IPS e.max®

Indications

  • Anterior and posterior restorations (incisal/occlusal reduction 1.5 - 2.0 mm)
  • Veneers (.6 - .8 mm of facial reduction)
  • Minimally invasive inlays, onlays, and partial crowns
  • Implant restorations

Contraindications

  • Signs of severe bruxism and/or clenching
  • Limited occlusal space
  • A history of broken restorations and/or teeth Preparation
  • 1.5mm occlusal and axial wall reduction
  • 1mm chamfer margin required

Adjusting and Polishing

  • Use a fine grit diamond at slow speed with copious amounts of water
  • Polish with a porcelain polishing wheel (Brasseler, Shofu and Vident) and diamond polishing paste

Bonding or Cementation

Bonding: Indicated for maximum retention and compressive strength of crowns, veneers, inlays and onlays when tooth preps are primarily supra-gingival and isolation is possible. Use self-cure or dual cure adhesive cements for most restorations. For cosmetic veneers use light cure or dual cure cements with shading options. Recommended adhesive resin cements include:

  • Variolink II (Ivoclar Vivadent)
  • RelyX ARC (3M Espe)
  • Calibra (Dentsply)

Cementation: Indicated for full coverage crowns only. Use self adhesive resin cements or resin modified glass ionomer (expansion less than .5%) in situations where a conventional cement would normally be used, i.e., a retentive prep design, a high-strength restoration with adequate thickness, or a tight fitting crown. Some recommended self-adhesive cements include:

  • RelyX Unicem (3M Espe)
  • SpeedCEM (Ivoclar Vivadent)
  • GC Fuji Plus (GC America)

Dental Insurance Codes

  • D6519 Inlay/Onlay - Porcelain Ceramic
  • D2740 Crown - Porcelain/Ceramic Substrate
  • D2783 Crown 3/4 Porcelain Ceramic (Does not include veneers)
  • D2962 Labial Veneer (Porcelain Laminate)
  • D6245 Pontic Porcelain/Ceramic
  • D6740 Abutment Crown Porcelain/Ceramic

Empress®

Pressed for fit and layered for beauty, Empress® crowns and veneers provide the best in all -ceramic anterior esthetics. With over 25 million units completed worldwide and 15 years of success, you can be confident in meeting your patient’s highest expectations. And now there is Empress® Esthetic with improved strength and enhanced optical properties.

Empress Advantages

  • Life-like translucency and esthetics
  • Kind to opposing dentition
  • Biocompatibility

Empress Indications

  • Anterior Crowns
  • Veneers
  • Inlays and Onlays

Empress Contraindications

  • Bridges

What To Send

  • Upper and lower models or impressions
  • Shade
  • Bite registration